An order's life, from New to Done

Every order moves through the same five stops: New, Quoted, Paid, Making, and Done. You change the status with one click on the order page, and from Paid onward the customer's tracking page notes each step in plain words, so you do not have to send updates. An order that falls through can be marked Cancelled without deleting it — and if the customer comes back around, moving it out of Cancelled brings it back to life with everything still on it. The same goes for a Done order that turns out to need one more thing.

If those five words are not the words you use, change them. On the Orders page, the board lets you rename any of the five stops and add your own steps in between them — a Waiting on blanks column between Paid and Making, say, or a Ready for pickup column before Done. Each step you add hangs off one of the five core stops, so your board can look like your actual way of working without breaking the parts of Broidry that depend on knowing whether an order is paid or finished.

The five statuses

New means the order just arrived. Read it over and check that nothing is missing. If the customer skipped a detail, the order says so plainly.

Quoted means you have priced it. Build the quote on the order page. Your rate card fills in the numbers, and you can adjust any line before sending. The customer gets a link where they accept the quote with one click.

Paid means the money part is settled and you are clear to stitch. Payments the customer reports land on the order for you to confirm.

Making means it is on your machine or your table. The customer's tracking page updates so they stop wondering.

Done means it is finished. This unlocks the share tools: a social post about the finished piece, a review request, and the package insert card.

Reading the board as a list, and printing it

Above your orders are three buttons: Columns, List, and Photos. Columns is the board you drag cards along. List gives you one order per row, soonest date first, so twenty orders fit on one screen. Photos shows the same orders as big picture cards. Whichever you pick, that browser opens on it next time.

On List and Photos there is a button under the quick filters that says "Pick which steps show". Press it and you get a checkbox for every step you have, plus Cancelled. Uncheck Done and finished orders come off the list, so what is left is only work you still have to do — that is why Done and Cancelled start off. The plain words beside the button say which steps are switched off and how many orders that is holding back. The Columns board is not affected, so a finished order is still sitting there to drag around.

"🖨 Print this list" opens those same orders on a page built for paper. Every column is a checkbox: order number, customer name, what it is, sizes and how many, due date, which step it is on, pickup or ship, price and what is paid, their email or phone. Three more print on their own line under each order because they need the room — what it says, thread and font, and your notes on the order. Check "A box to check off" and the sheet becomes a checklist you carry to the machine.

You choose which steps go on the sheet there too, what heading sits at the top, and whether it reads by due date, by customer name, or step by step. "Print / save PDF" sends it to your printer, and your browser's print box can save it as a file instead if you want to email it to someone. Your boxes and your heading are remembered, so the next sheet comes out the same way.

Moving or messaging many orders at once

On List, every order has a checkbox at the start of its row. Check off the ones you want, or click "Check off all listed" to check off every order the list is showing. Search and the quick filters narrow the list first, so you can search a product name and then check off every order for that product.

"Move the orders you checked off to" moves every one of them to the column you pick, one after another, and counts as it goes. Each one follows the same rules as moving a single order. Moving orders to Done emails each customer that their order is finished, and the page asks you to confirm before it does.

"Message these customers" opens a box for one message. Write {name} where the customer's first name goes and {item} where what they ordered goes, and the box beside it shows what the first customer will read. When you send it, each customer gets the message on their own order page and by email, as if you had written it on that order, and their reply comes back to that order. A customer with no email on their order gets it on their order page only, and the page lists who that is. Etsy orders and canceled orders are left out.

To have many customers check their spelling before you stitch, click "Start with a message asking them to confirm their wording" under the message box. The draft has {confirm} in it, which becomes each customer's own link to a page showing exactly the wording you have, with one button to confirm it. An order whose customer has confirmed shows "Wording confirmed" on its row in List. The quick filter "Wording not confirmed" lists every open order with wording that nobody has confirmed yet, so two days later you can check off every one of those and send it again. Anyone who already confirmed is left out of a message with {confirm} in it.

"Print packing slips" opens one slip per checked order in a new tab, each on its own page: your shop name, the order number, who it goes to and their address, and what is in the package with its size and wording. There are no prices on a slip. Click "Print / save PDF" to print them all.

"Download addresses" saves a spreadsheet of the checked orders with the name, street, city, state, ZIP, email, and item on each row, for a label service that takes a spreadsheet of addresses. Customers type their address into one box, so Broidry splits it into those columns. When it cannot find a street, city, state, and ZIP, it leaves those columns empty for that row and writes "Check this address" in the last column. The address exactly as the customer typed it is on every row.

When a second person has a login on your shop, you can split the work. "Give checked orders to" puts that person's name on every checked order, and their name shows on each row in List. Each of you gets a quick filter called "Mine" that lists only your own orders. On one order, the same choice is the "Who is making this" box under the status. Giving an order to someone changes nothing else about it and tells the customer nothing.

Orders you sold somewhere else

Not every order on your board was sold on Broidry. An Etsy sale that mirrored in, a piece someone bought at a craft fair, a phone order you typed up — they all sit on the board looking like work waiting to be done, and every normal way of finishing them emails the customer something. Days after the package arrived, "your order is finished!" is just confusing.

So the order page has two things for it. The first is where it was sold: click Sold on Etsy or off-platform? Mark it, and pick Etsy, In person, or Other. An order marked Etsy stops sending Broidry emails to that buyer entirely — Etsy already sends their receipt, their shipping notice, and their review ask, and two of everything is worse than one. The channel shows as a small orange chip on the board so you can tell at a glance where an order came from.

The second is the quiet close: I filled this one somewhere else. Say where it got filled and click Close it — no email. The order comes off your board and out of your stitch hours, the record still says where it went a year from now, and the customer hears nothing, because they already have their piece. If you close one by mistake, it undoes.

When you already know why an order is sitting

Sometimes an order is stalled and that is fine — the school pays after the work is done, the customer is out of town until the 12th, the deposit is coming with the blanks. You know the story, so a daily "they still haven't paid!" reminder is just noise.

On the board, every card has a small "Stop reminders" link. Click it and a box opens headed "What are you waiting on?". Type a short note there, or leave it blank, then click "Pause reminders". The order drops out of your morning summary and your follow-up list, the card dims and sinks below your active orders, and your note shows right on it so you remember the story at a glance.

You do not have to remember to turn the reminders back on. The moment anything really happens on the order — a payment arrives, you move it to Making, anything that changes its status — the pause ends by itself and Broidry starts watching it again. There is also a "Turn reminders back on" link on the card if you change your mind sooner. The customer is never messaged either way.

Changing the date an order is needed by

Open the order and look down the details list for the line that says Need by. Next to the date is a small link that says Change, or Set a date when nobody has given one yet. Click it, pick the day, and click Save. That is the whole thing.

Your customer's tracking page shows the new date straight away, and a line saying the needed-by date changed goes into your message thread with them, so there is a record of it without you writing one. Your make list on the Production page re-sorts to the new date as well.

Everything else about the order changes the same way, from the “✏️ Edit order details” button near the top of the page: the color, the sizes, the wording and font, the thread, pickup or shipping, and your notes. The order keeps its number, its quote, and its whole conversation, so nothing is lost by editing instead of starting over.

Each stitched spot in that panel has a Font menu and a Thread color menu. The Font menu lists only your own shop's fonts: the ones you starred first, then fonts you uploaded, then the fonts built into Broidry. The Thread color menu lists your thread drawer first, then the built-in Madeira colors. Under the two menus, a preview shows the wording stitched in the font and thread you picked, so you can see a font before you choose it.

To change the item itself, click "Change the product or blank…" on the order. A saved quote is cleared so you can price the new item, and an order that was Quoted goes back to New.

The safety nets along the way

Before you stitch, the order page shows the exact wording the customer approved, frozen at the moment they approved it. If the spelling was never confirmed, the order tells you, and you can send a one-click confirmation link.

If you upload a proof picture, the customer approves it from their link before you thread the machine, and the approval is stamped with the date and time.

Send your customer several photos in one message

The Messages box on the order page is where you write to your customer. To send pictures with your words, click "＋ Add photos" under the box and pick every photo you want at once. You can also drag them onto the box from your computer. Each photo you picked shows by name above the Send button, with an ✕ to take one back out, and "＋ Add more photos" adds the rest.

One message holds up to 10 photos. Your words and all the photos arrive together as one message on your customer's order page, and the email they get says how many photos are waiting there. Your customer can send you several photos the same way from their order page.

Print the order for the machine

Open the order and press "🖨️ Print the work sheet" in the buttons at the top right, under the status. There is a second link to the same sheet further down called "Work sheet with the proof photo", next to the quote sheet and the invoice. It opens a one-page sheet built to be printed and put in the bin with the blank: the proof picture large across the top, then what you are making — the blank, the color, the sizes — and one line per spot with the wording, the font, and the thread number. "Print / save PDF" sends it to your printer or saves it as a file.

Under the picture the sheet prints what the customer sent you: their logo or reference photo, and the screenshots of the conversation the order was built from. The proof at the top is your drawing of the job; these are what the customer actually asked for, so both are on the paper at the machine. An order with neither leaves the section off instead of printing an empty box.

There are no prices on it anywhere. That is on purpose, so you can hand the sheet to a helper without handing over what the job is worth. It does say whether the order is paid, because that is what decides if it gets stitched today. The customer quote sheet, next to it on the same page, is the one with the money on it.

Some lines say "Thread: customer left it up to you" or "Font: customer left it up to you". That is your buyer pressing the "Not sure? Let us pick" button in your shop instead of choosing, so the decision is yours. The printed sheet leaves a short line next to it to write down what you picked, and the same wording shows on the order page and the run sheet.

If you have not made a mockup for that order yet, the sheet still prints — it says so where the picture goes, instead of leaving a hole. Make one in the Mockup Studio and it shows up there.

Scan the sheet when the piece is finished

There is a small square code at the bottom of the work sheet. Point your phone's camera at it and it opens that one order on a screen built for standing at the machine: the proof picture, what you are making, and one big button. Press it once to mark the order started, and once more when it comes off the machine. Your customer's tracking page updates by itself both times, so you never have to send the "it's ready" message.

You do not need an app for this. Every current iPhone and Android reads these codes with the camera that is already on the phone.

You do have to be signed in to Broidry on that phone. The first scan on a new phone shows you the sign-in screen, and after that it stays signed in. This is on purpose: the code is a plain page address and carries no way in with it, so the sheet is safe to leave in a bin, hand to a helper, or drop on the floor.

If the order is not paid yet, the screen says so instead of showing a button that would fail, and links you to the order to collect payment first.

Send your customer a photo of the finished piece

Once an order is Done, its page shows a card called "📸 The finished piece", and Machine mode shows the same card right after you finish a piece. Press "📸 Snap the finished piece" to open your phone's camera, or "or choose a photo you already took" to pick one you have. Broidry writes the "it's ready" message under the photo. Edit anything you like, then press the send button with your customer's name on it. If you attached the wrong photo, press "📸 Snap a different one" or "Pick a different photo" before you send, and the new photo replaces it. Nothing goes to your customer until you press send.

Link a hand-entered order to the listing it was for

An order you typed in yourself has no listing behind it, so it shows no product photo and, for a sold-as-shown piece, keeps asking for font and thread picks it never had. Open the order and press "Link this order to one of your listings". Pick the listing and press "Link it". The order then shows that listing's photo and title.

Every listing in your shop is in that list, with the ones that match this order's item type first. If you pick a listing of a different item type, the note above the list says so: the order becomes that item type too, and any saved quote is cleared so you price it again for the right item.

Put your own rows on the work sheet

The sheet carries your setup facts too, and you decide what they are. On any order, the "Your fields" card has "＋ Add a field" — write a name like Needle, Stabilizer, Thread color, or Hoop, and it appears on every order from then on.

Order fields print on the work sheet as soon as you add them. There is no second setting to go turn on. If you filled the field in on that order, the sheet prints your answer; if you left it blank, it prints the name with a line next to it, so you can write it in standing at the machine. That is the part people were rebuilding in a Google Form.

Under each field is a checkbox that says "Print this on the work sheet". Uncheck it for anything that is office paperwork rather than setup — a school PO number, an invoice reference — and it stays on the order page without going out to the machine. Fields you keep on a customer never print here, because the work sheet is about one order.